We offer a wide array of Non Destructive Testing Services for metal structures like Ultrasonic Testing Services, Radiography Testing Services, Magnetic Particle Testing Services, Dye Penetrant Testing Services, Stress Relieving, Leak Testing Services, Vacuum Testing Services, Metallography Services and so on.
Non Destructive Testing (NDT), Non Destructive Evaluation (NDE) and Non Destructive Inspection (NDI) are the terms used to represent the techniques that are based on the application of physical principles employed for the purpose of determining the characteristics of materials or components or systems and for detecting and assessing the inhomogeneities and harmful
defects without impairing the usefulness of such materials or components of systems. NDT plays an important role not only in quality control of the finished product but also during various stages of manufacturing. NDT is also used for condition monitoring of various items during operation to predict and access the remaining life of the component while retaining its structural integrity. NDT enables optimum utilization of components without sacrificing safety. The use of microprocessors for data acquisition and processing and automated devices for reliable testing have vastly improved the condition monitoring on complex components and plants. The operator dependency for routine inspection is reduced and thus the person can concentrate more on the technological aspects. The end result is the saving in time, cost and improvement in precision and reliability of the results obtained.
| Service Type | Discription |
|---|---|
|
Min. Order Quantity |
1 Day |
|
Testing Type |
Radiography Testing |
|
Service Type |
Quality Control |
|
Test Location |
Pan India |
|
Usage/Application |
Mechanical Engineering |
|
Process Type |
Welding |
|
Certification Scheme |
Employer Based Certification |
|
Testing Methodology |
Radiographic Testing |
|
Value Data Report On |
Internal Defects |
|
Sector Type |
Power Generation, Steel Structural Fabrication, Oil and Gas, Fertilizers, Chemical Plant, Power Plan |
|
Testing Result Duration |
Less Than 1 Hour |
Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Either an X-ray machine or a radioactive source (Ir-192 or Co-60) can be used as a source of photons.
Since the amount of radiation emerging from the opposite side of the material can be detected and measured, variations in this amount (or intensity) of radiation are used to determine the availability of flaws or discontinuities in the material. Penetrating radiations are those restricted to that part of the electromagnetic spectrum of wavelength less than about 10 nanometres.
Advantages
1. Best NDT method for detection of volumetric discontinuities.
2. Internal flaws could be precisely located.
3. Records/Radiographs could be stored forever.
Additional Information:
| Service Type | Discription |
|---|---|
|
Min. Order Quantity |
1 Day |
|
Material Type |
SS,Copper,Nickle,Steel |
|
No. Of Unit To Be Tested |
200 |
|
Industry Type |
Refineries, Production, Chemical Plant |
|
Location/City |
Pan India |
|
Sample Test Location |
Customer Place |
|
Product Type |
Alloy |
|
Mode Of Report |
Soft Copy |
|
Usage/Application |
Material Sorting |
|
Test Location |
Customer Place |
|
Application Type |
Material Sorting |
|
Testing Type |
Non Destructive Testing Services |
|
Service Duration |
As desired by Customer |
|
Destination |
All India |
|
Type Of Service Provider |
Inspection and Testing Engineers |
|
Need Test Result |
<2 Hours |
|
Calibration Check Required |
Yes |
|
Need Standard Certification |
Yes |
Today, many major oil companies require that every pipe, flange, connector, valve and welding seam in critical parts of the plant be measured to verify that materials match engineering specifications. In addition to compatibility issues, several other reasons can exist for material specification including design, corrosion resistance, and compliance to codes and standards such as ASME Boiler and Pressure Vessel Code. It also finds applications in the following areas :-
Aerospace Manufacturing • Aerospace Castings • Aerospace Fastener QA / QC • Failure Analysis
Electric Power Industry • Plant Inspection • Failure Analysis PMI • Incoming Materials • In Stock Materials • In service Testing
Star NDT Services to customers at various places across India which include, Delhi, Uttar Pradesh (Ghaziabad, Sahibabad, Greater Noida, Noida, Lucknow, Agra, Kanpur, Mathura, Jewar, Sikandrabad, Meerut, Sonbhadra, Pata, Anpara, Allahabad, etc.), Madhya Pradesh, Punjab, Rajasthan, Haryana, Himachal Pradesh, Uttarakhand, Bihar, Chattisgarh, Gujarat, Maharashtra, Jammu Kashmir, West Bengal, etc.
Additional Information:
| Service Type | Discription |
|---|---|
|
Minimum Order Quantity |
1 Day
|
|
Magnetization Material |
Iron |
|
Testing Current Type |
AC |
|
Demagnetization Process |
AC Demagnetization |
|
Testing Type |
Fatigue Crack |
|
Service Mode |
Offline
|
|
Product Type |
Motor Shaft |
We provide magnetic particle testing services using magnetic yoke, coil, prod, etc. which are usied in both visible and fluorescent mode.
Locations serviced include :- Shrinagar, Jammu, Kargil, Shimla, Kullu, Manali, Ludhiana, Bathinda, Jalandhar, Amritsar, Chandigarh, Ropar, Talwandi, Jhajjar, Hissar, Gurgaon, Manesar, Panipat, Sonipat, Faridabad, Palwal, Ballabhgarh, Bahadurgarh, Delhi, Jaipur, Bikaner, Jodhpur, Alwar, Chittorgarh, Kota, Noida, Ghaziabad, Greater Noida, Aligarh, Kanpur, Allahabad, Agra, Gorakhpur, Meerut, Mathura, Varanasi, Sikkim, Arunachal Pradesh, Jhansi, Gwalior, Bina, Bhopal,Indore, Mumbai, Pune, Nagpur, Vadodara, Ahmedabad, Goa, etc.
Additional Information:
| Service Type | Discription |
|---|---|
|
Place of Service |
Factories |
|
Time Duration |
2 to 3 Hours |
|
Service Mode |
Offline |
|
Service Type |
Dye Penetration |
|
Testimonials Format |
Hardcopy |
|
Crack Testing Type |
Corrosion Crack |
|
Soil Testing Type |
Resistance Properties |
|
Sample Test Location |
Mobile Testing |
We are among the leading names engaged in the Penetrant Testing Services. We provide this service which is also known as liquid penetration test. It is among the mist oldest and widely applicable NDT methods. This test is best suited for any kind of non-porous material and is best for detection of surface breaking. It is often used for stainless steel and stainless welded items. We offer the service at the market leading prices.
The objects are coated with visible or fluorescent dye solution and a developer is applied. The developer acts as blotter and draws trapped penetrant out of imperfections open to the surface.
| Service Type | Discription |
|---|---|
|
Application |
Aerospace |
|
Testing Type |
Hardness Testing |
|
Components of Testing |
Pressure Vessels |
|
Place of Testing |
Laboratory |
|
Type of Material |
Destructive |
|
Mode |
Offline |
We are among the leading companies who offer Ultrasonic Testing Services. We provide these services with the usage of ultrasonic waves to examine parts and products for imperfections. We use the modern equipment & accurate result assessment which leads to identification of all possible imperfections.
Ultrasonic Testing Services include:
Additional Information:
| Service Type | Discription |
|---|---|
|
Frequency of Requirement |
Monthly |
|
Finished Product Delivery Type |
Home Delivery |
|
Automation Grade |
Automatic |
|
Service Mode |
Offline |
|
Service Location |
India |
|
Service Type |
Consultation |
Supported by our talented professionals, we are offering an exceptional assortment of Welding Consultancy service. These services are rendered under the guidance of industry experts and as per the client’s needs. More to this, these are offered at very effective prices within a limited period of time.
Visual inspection is the most widely used among all Non Destructive Tests. It is simple, easy to apply, quickly carried out, and usually low in cost. Even though a component is to be inspected using other NDT methods, a good visual inspection should be carried out first. A simple visual test can reveal gross surface defects thus leading to an immediate rejection of the component and consequently saving much time and money, which would otherwise be spent on more complicated means of testing. It is often necessary to examine for the presence of finer defects. For this purpose, visual methods have been developed to a very high degree of precision. With the advent of microprocessor and computers, visual examination can be carried out very reliably and with minimum cost. Image processing patterns recognition and automatic accept/reject choices are used when large numbers of components are to be assessed.The basic procedure used in visual NDT involves illumination of the test specimen with light, usually in visible region. The specimen is then examined with eye or by light sensitive devices such as photocells. The equipment required for visual inspection is extremely simple, but adequate illumination is absolutely essential. The surface of the specimen should be adequately cleaned before being inspected.
We “inspection & testing engineers” are among the leading companies who are well-known as a fast-growing and dynamic organization proving an integrated suite of testing solutions. Call Us At 9871034373 Or Contact Our Sales Representatives.